Automated Electric Homebrew Systems

Complete Brew Boss Systems

Electric Brew in a Bag (E-BIAB)


Complete systems include the following components:

  • 10, 15, or 20 Gallon Stainless Steel Kettle with Cover
  • Strainer Basket with Handle
  • Brew Boss Wi-Fi Controller (120VAC or 240VAC) with Digital Temperature Probe
  • Brew Boss Electric Heater Assembly (5500 Watt, 3500 Watt, or Dual 1500 Watt)
  • Stainless Drain Valve
  • Direct Contact Weldless Probe Adapter for Temperature Sensor
  • 7" or 10.1" Android Tablet
  • Plastic or Stainless Steel Pump
  • Brewery Grade Hoses
  • Stainless Steel Barbed Fittings for Valve and Pump
  • Custom Sparge Sprayer
  • Food Grade Mesh Bag for Grains

Brew Boss Controller and Heater Kit

Convert Your Gas System or Build Your Own System


Controller and Heater kits include the following components:

  • Brew Boss Wi-Fi Controller (120VAC or 240VAC) with Digital Temperature Probe
  • Brew Boss Electric Heater Assembly (5500 Watt, 3500 Watt, or Dual 1500 Watt)
  • 7" or 10.1" Android Tablet


This system includes the Brew Boss controller and the matching electric heater assembly to allow you to convert your existing gas based brew setup, RIMS, HERMS, etc. to electric or create your own electric brewery.  The heater assemblies and controller have heavy duty matched plugs for easy disconnect.  Heaters are available in 5500Watt, 3500 Watt, and Dual 1500 Watt versions.  The Dual 1500 Watt version uses two separate 120VAC circuits in your home and is a viable option for those that don't have access to 240VAC circuits.  The controller and heater kit  is available with or without the Android Tablet, should you already own one.

Brew Boss DIY Controller Kit

Build Your Own Electric Brewery


The DIY (Do It Yourself) Controller kit includes the following components:

  • Brew Boss Wi-Fi Controller (120VAC or 240VAC) with Digital Temperature Probe
  • 7" or 10.1" Android Tablet


This system includes the Brew Boss controller which allows you to convert your existing gas based brew setup, RIMS, HERMS, etc. to electric or to create your own electric brewery using your own electric heater.  The heater output on this system is simply an unterminated cable that you connect to a heater you supply.  The Dual 1500 Watt version uses two separate 120VAC circuits in your home and is a viable option for those that don't have access to 240VAC circuits.  The DIY controller kit  is available with or without the Android Tablet, should you already own one.

Weldless Direct Contact Probe Adapter

Install the Brew-Boss Temperature Sensor in Your Thin Wall Kettle


This stainless steel fitting allows you to install the Brew-Boss (or other 1/4" dia.) temperature probe into your kettle by simply drilling a 1/2" dia. hole.  It provides excellent performance as the temperature probe makes direct contact with the water or wort in the kettle.

Probe Installed Inside Kettle

Probe Installed Outside Kettle

Stainless Steel Flow Restrictor Valve

Regulate the Flow Out of Your Pump


This stainless steel valve provides an efficient and simple method of regulating the flow out of your recirculation pump, minimizing foaming that can occur with some recipes.  This valve threads directly onto the discharge side of the pump.

picoBrew E-BIAB Upgrade $129

New Firmware for existing picoBrew E-BIAB Owners


This upgrade includes new firmware for the existing picoBrew E-BIAB system that will allow that system to be upgraded to utilize the new Brew Boss Application.  Use your existing hardware and get all the benefits of the new Brew Boss platform, including:


  • Editable User Configurable Brew Steps
  • Save and Restore Brew Step Definitions and Parameters
  • Nearly Infinite Power Control with the Power Slider Bar (great for finding that sweet spot for the perfect rolling boil).
  • Alarms
  • Textual Prompts.
  • Much easier adjustment of setpoints and timers.
  • Calculates power used and electricity cost in real time.
  • Graphical display of temperature history.
  • Control traditional RIMS, HERMS, and other brew setups as well.

Hops-Boss

Automatic Pellet Hops Feeder


The Hops-Boss is an automatic pellet hops feeder that interfaces wirelessly to the Brew Boss controller and allows you to dispense up to seven (7) different hops additions at the times you specify during the brew session.  It can also be used to dispense other finings such as Irish Moss, etc.  Never miss a hops addition again!


A stand-alone option is also available that provides a wi-fi interface that you can connect to with your tablet or smartphone (including iPads and iPhones!).  You simply set your times and the Hops-Boss will do the rest. 


An optional Heat Shield is also available for those that are still brewing with gas :(

The Hops-Boss is constructed from 304 Stainless Steel with specially machined plastic Hops-Cups (we call them Mortar Shells) and simply sits on the edge of nearly any kettle.  Each cup holds about 1.75 oz of pellet hops or over 3/4 lb for all 7 cups!


The Hops-Boss is supplied with a power supply.