Home > Brewing Equipment and Accessories >

Solid State Control Relay
Solid State Control Relay


 
Price: $38.00

Product Code: SSR-25A
Qty:

Description
 
Solid State Control Relay for Brew-Boss V1 Controllers. These are industrial quality control relays and are highly recommended for DIY Brew-Boss systems or as replacements in the V1 Brew-Boss controller. They are DC controlled AC relays and are 25 AMP versions and can be used as replacements for either the heater or pump relays. These are zero crossing relays. These relays will short closed if shorted as in the case of when a heater element shorts out. In that case, the relay must be replaced as they will appear "stuck on".Please confirm that your heater element is functional using an ohm meter before installing a new solid state relay, as if the heater is shorted out, it will destroy the solid state relay.

These must be used with appropriately sized heat sinks and heat sink compound (white thermal grease) if not used in the Brew-Boss controller. If replacing a relay in a Brew-Boss controller, make certain to scrape the white thermal compound grease off the old relay and re-apply to the new relay before installing.

DC control, SCR Blocking voltage 800 to 1600V, MOV Protected Output dV/dT Immunity up to 2000V/uSec, Zero Cross Synchronized, LED Input Indicator, CE and RoHS compliant, 4000V Isolation.

PLEASE DO NOT EVEN CONSIDER USING THE CHEAP CHINESE SOLID STATE RELAYS IN THE BREW BOSS CONTROLLER. THEY WILL FAIL AND POSSIBLY CATCH FIRE!