Brew-Boss Pro Controller with Hops-Boss Interface (Drives two 5500 Watt Heaters. Heaters and Cables not Included)
The Brew-Boss PRO controller is supplied with a 10 foot long, 4 conductor, 6 gauge cable for powering the unit with
240 Volts AC. It is highly recommended that you install a Ground Fault
Interrupter (GFI) type breaker on the circuits you will be plugging/wiring the
Brew-Boss Pro controller into. The controller is built with all UL Recognized components to UL standards, but currently is not UL certified and does not bear the UL logo. We can have the controller UL certified if required by your local electrical/building inspector for commercial installations (additional fees apply, contact us for more information).
Brew-Boss Pro ControllerThe Brew-Boss Pro controller requires a 240 Volt 50 Amp GFCI circuit. The controller
has two (2) 240 Volt output receptacles that connect to Brew-Boss Heater
assemblies. It also has a 120 volt AC application controlled receptacle for the supplied pump. An additional 120 volt always on receptacle is provided for powering/charging the control tablet. Jacks are also provided for the digital temperature probe and the Hops-Boss Pro.
Note: We no longer sell Android Tablets with our systems. You will need an Android Tablet to run the Brew-Boss app on. We recommend a 10.1" screen or larger, but it will run on tablets with screen sizes 7" or larger. The app is not designed for phones and will not run on phones. If you don't have an Android tablet, we recommend this one from Amazon or an Amazon Fire tablet.
The controller has a 20 character x 4 line backlit LCD display that displays pertinent operational data.
The Pro series controller also includes a manual menu selector that allows the controller to be used in a manual mode when not connected to the Brew-Boss app. This menu allows the following functions:
- Set temperature setpoint (controller will hold that temperature)
- Toggle the pump on or off
- Set the heater power output (will hold that powere regardless of temperature)
- Set the Hops-Boss Position
- Start or stop Fermentation Mode
- Set Heating Parameters
- Set a Timer
Please note that systems are built to order and can take up to 3-4 weeks to ship based on order backlog and production schedules.
Warning - Shock Hazard!
is an all electric system. It eliminates the many dangers associated
with gas fired systems, but working with electricity can be dangerous.
You can be seriously injured or worse die by electricity. This system
requires that you provide a 240VAC 50 AMP GFCI circuit.
By ordering this product, you accept all liabilities for any and all
damages that may occur by your usage of this equipment. Further you
agree to install all equipment in accordance with your local codes and
regulations as required. We will require that you sign liability release
prior to shipping you hardware.