Home > Brewing Equipment and Accessories > COFI Infusion Filters >

2020 Black Friday Special - 20 Gallon Kettle and Filter
2020 Black Friday Special - 20 Gallon Kettle and Filter

Alternative Views:

Price: $199.00

Availability:: Usually Ships in 1 to 2 Weeks


$199 Black Friday Special

20 Gallon Kettle and Filter

Limited Quantities

Here is your chance to pick up a genuine 20 Gallon Brew-Boss kettle with the matching patented COFI filter at below factory cost! This is our best Black Friday special ever. Note that the COFI filter does not include the center infusion tube or hose assembly. These are close-out filters that were received from the factory without those items and we do not have those items available.

Note: Accessory Port on Kettles is no longer in front as shown, it is located on the back right of this photo.

Kettle Below shown with Filter and Center Infusion Tube Installed. The Tubing and Center infusion Tube are NOT included and are not available...Shown to show you how the tube and hose are connected!

This special includes the matching size COFI Filter 15" Dia.

The Brew-Boss Kettles have Welded 1-1/2" Tri-Clamp ferrules for a heater and valve or pump. The kettle also includes a Cover, Camlock Accessory Port, and Direct Contact Weldless Temperature Probe Mount. Includes etched volume markings in both Gallons and Liters.

These are optimum 1.2:1 ratio kettles!

20 Gallon Kettle Dimensions - 450mm Dia x 540mm H (17.75 in x 21.25 in)

This special includes our clearance/closeout COFI filter. You will not find a lower price on brewing filters of these sizes. We received these COFI filters from the factory without center infusion tubes, so we are selling them at a deep discount without the center infusion tubes. Our loss is your fortune!

You can use this kettle and filter in the traditional Brew-In-A-Basket (BIAB) fashion as is. If you want to use it with the benefits of our patented (Patent Number US10400200B1) COFI (Center out forced infusion) filter system, you will need to fabricate your own center infusion tube. We do not have these available for sale.

The center infusion tube is a tube that has multiple holes drilled to distribute the mash water into the center of the grain bed during mashing (see photo diagram of the concept). There are 1/2" Male Pipe Threads on both ends, one end threads into the false bottom and the other end is used to attach a lifting ring that when lifted causes the false bottom to squeeze the remaining liquid out of the grains. If you want to make your own, the tube for the 20 gallon filter needs to be 15 inches long.

The 15 inch filter is 15 inches in diameter x 18 inches high. The support legs allow the filter to sit above the heating element and are 2-1/2 inches tall. This brings the total height of the unit to 20.5 inches.

This item includes the Kettle, Kettle Cover, Weldless Temperature Probe Mount, Camlock Accessory Port, Filter Body, Filter Cover, Locking Handle (doubles as lift handle), and False Bottom for Filter. It DOES NOT INCLUDE THE CENTER INFUSION TUBE OR RUBBER FEET FOR THE FILTER!

You can order the rubber feet for the filter basket here.

You can combine this with our Black-Friday Heater Special as well for only $75. If you order a heater, make sure to pick up a triclamp gasket and clamp as well! For a low cost controller, we recommend the 240 Volt Blichmann BrewCommander™ Brewhouse Controller. It is available elsewhere on the web for around $375 (Google it).

Quantities are Limited and All Sales Final on these units, no Returns!

Will will only ship these via Fed-Ex!