Preconfigured Brew-Boss Deluxe 20 Gallon 240 Volt Electric Brewing SystemThis item is for our 20 gallon Deluxe System that is configured with the most popular options. It includes the following items:
The controller is
supplied with 15 foot long 10 gauge cable for powering the unit with
240 Volts AC. The 240VAC power cable is supplied with a molded L6-30P twist
lock plug. It is highly recommended that you install a Ground Fault
Interrupter (GFI) type breaker on the circuit(s) you will be plugging the
Brew-Boss into or use our inline GFI unit. If you need a plug other than the L6-30P provided, you may simply cut the supplied plug off and connect a plug that matches your outlet.
- 240 Volt Brew-Boss Controller V2.0
- 10" Android Tablet with the Latest Brew-Boss App Installed
- Brew-Boss 4 Inch Digital Temperature Probe
- Weldless Direct Contact Temperature Probe Kettle Mount
- 20 Gallon Brew-Boss Kettle with Cover and Deluxe Accessory Port
- Brew-Boss Exclusive 5500 Watt L6-30 Triclamp Stainlesss Steel Ripple Heating Element
- 8 Foot L6-30 Extension Cord for Heater Element
- Stainless Steel Mesh COFI Infusion Filter for 20 Gallon Brew-Boss Kettle
- False Bottom for COFI Filter with Stainless Steel Center Infusion Tube
- 24 Volt Brushless DC Brewery Grade Pump with Stainless Steel Pump Head
- 90 Degree Barbed Elbow Threads Onto Center Infusion Tube
- Stainless Steel Cam-Lock Fittings for All Hose Connections
- Stainless Steel Flow Regulation Ball Valve (Gets Installed on Pump Discharge)
- TriClamp Gaskets and Clamps
- Stainless Steel Wing Nut Type Hose Clamps
- 6' of Brewery Grade Silicone Tubing
- Stainless Steel Lift Ring for COFI Filter
- High Quality Teflon Pipe Thread Tape
controller requires a 220-240 Volt circuit of at least 30 Amps with a GFI breaker (or our inline GFI) installed to operate. The controller has a single 240 Volt
L6-30R twist lock output plug that connects to a Brew-Boss Heater using the supplied L6-30 extension cord. A digital temperature
probe is included with this controller. The controller is shipped with a
L6-30R twist lock receptacle for a heater that mates to the Brew-Boss
integrated elements. If you have a different heater, you can simply cut
the end of the heater cable off and wire to your heater.
5500 Watt Heater
The Brew-Boss Heaters are all stainless steel and designed especially for brewing.
They clean very easily and look brand new after each brew session.
The kettles are complete and are supplied with TIG welded ferrules for the heater(s) and pump/output ports. They also include the Weldless Direct Contact Temperature Probe Mount. The Kettles also include electrically etched volume markings on the inside of the kettle.
Brew-Boss kettle with volume marking on the inside (20 Gallon Shown)
Each kettle is also equipped with a side recirculation Deluxe Accessory Port near the top of the kettle. This port has a Cam-Lock quick connect installed on both the inside and outside of the kettle to allow connection of the recirculation system hardware. The Swirl-Boss whirlpool device attaches to this port as well. Of course, the kettle includes a cover/lid as well.
Brew-Boss Deluxe Accessory Port
The 20 gallon kettle
will do 5 or 10 gallon batches and also 15 gallon batches if needed
using the Hybrid method.
COFI Mash Hardware
(COFI, our patent pending mashing technology that can increase efficiency)
Mashing is the brewer's term for the hot water steeping process which
hydrates the barley, activates the malt enzymes, and converts the grain
starches into fermentable sugars. The Brew-Boss system performs efficient mashing by continuously recirculating the wort during mashing through the grain bed, improving the efficiency over traditional Brew-In-A-Bag type systems. Recirculating the wort through the mash also creates a clearer wort, as the grain acts as a filter media as well.
This mash option uses a Patent Pending stainless steel mesh basket (COFI Filter) to contain the grains. This mesh basket is also equipped with a cover that prevents grains from exiting the basket over the top edge during mashing. This allows higher flow rates during mashing which can provide more efficient conversion. Recirculated wort is delivered to the grains via a special center infusion tube that maximizes coverage of all grains inside the filter, creating a very steady temperature profile within the grain bed without the need for stirring. The COFI filter also includes a Patent Pending false bottom within the filter that allows the grains to be squeezed when they are removed like a reverse French Press. This assures maximum extraction of sugars trapped within the grains. This eliminates the need for a sparge.
COFI Filter Attached to Accessory Port
In addition to the above items, this system includes the following options:
Pick-Up Tube- This durable
Tri-Clamp pickup tube is constructed of beautiful polished 304 stainless
steel. It attaches directly to the Tri-Clamp ferrule on the Brew-Boss
kettle using a Tri-Clamp gasket and Tri-Clamp Clamp (gasket and clamp
not included). It allows you to drain nearly all of the wort out of
your kettle without tipping the kettle and disrupting the trub on the
bottom. Mount this between your kettle and valve or between your kettle
and pump. Includes pick-up tube with 1.5" Tri-Clamp ferrules.
Swirl-Boss - This
is a nifty whirlpool device that mounts directly to the accessory port
on the kettle and allows you to whirlpool your wort before transferring
to your fermenter. Special reduced price when ordered with a Brew-Boss
Trivet Set - These
Three (3) silicone trivets are great for placing your Brew-Boss kettle on to
prevent heat transfer to your table or bench. The protect the surface
and keep the kettle from accidentally being slid around, so they add
safety as well. We sell these for less than our local Walmart does, so
if you need them, add them to the system order.
Other Available Options (additional cost)
In addition to the above included items, you can choose to include these additional items:
In-Line GFI - This is a portable In-Line GFI unit with L6-30 plugs already on it. This is handy if you do not have room in your home panel to add a GFI circuit breaker. it simply plugs into a L6-30 receptacle and the Brew-Boss controller plugs into it.
Hops-Boss - This is our patent pending automated hops feeder offered at a special reduced price if ordered with a system. Automatically adds your hops at the proper time.
Counterflow Chiller - We have found this to be the best chiller on the market. The copper in Plastic design never plugs and provides very high cooling efficiency from your cold tap water. Much better design than flat plate chillers that are prone to plugging up and impossible to clean and much more efficient than immersion chillers.
Fast Ferment Fermenter - This is quite possibly the greatest fermenter ever designed. We use these exclusively in our Brew-On-Premise operation and they are awesome. They eliminate the need for a primary to secondary transfer (potential oxygen contact and contamination) and your retired yeast sediment never touches the beer you drink. They also make harvesting yeast for re-use a dream. Once you use a FastFerment you'll never wonder how you every got buy with carboys or buckets.
Hoist - This is a really nice double line rope hoist that makes removing your grain bag, grain basket, or COFI filter very easy. It is auto locking so you don't have to tie it off or have someone else hold it. You'll need something to lift your grains out if you have a 15 or 20 gallon system. This hoist is the best we've found.plugs into it.
Please note that because of the configuration and options available, systems are built to order and take 1-2 weeks to ship based on order backlog.
Warning - Shock Hazard!
is an all electric system. It eliminates the many dangers associated
with gas fired systems, but working with electricity can be dangerous.
You can be seriously injured or worse die by electricity. This system
requires that you provide a 240VAC 30 AMP circuit and the appropriate
power plug for 240VAC systems and dual 15 AMP 120VAC circuits for 120VAC
systems. The use of ground fault interrupter(s) (GFI) is highly
recommended. If you are not comfortable or not knowledgeable with
electrical wiring please have a certified electrician wire your system.
By ordering this product, you accept all liabilities for any and all
damages that may occur by your usage of this equipment. Further you
agree to install all equipment in accordance with your local codes and
regulations as required. We will require that you sign liability release
prior to shipping you hardware.