Home > Complete Brewing Systems >

Preconfigured V3 Deluxe 20 Gallon 240 Volt Brew-Boss Electric Brewery System
Preconfigured V3 Deluxe 20 Gallon 240 Volt Brew-Boss Electric Brewery System

Alternative Views:

Price: $1,569.00

Availability:: Usually Ships in 3 to 5 Business Days
Product Code: BB-20DLX-V3

Pump Mount 90 Degrees:

GFI Protection*:


Condenser-Boss Steam Condenser*:




Preconfigured Brew-Boss Deluxe 20 Gallon 240 Volt Electric Brewing System

This item is for our 20 gallon Deluxe System that is configured with the most popular options at a discounted package price. It includes the following items::

  • 240 Volt Brew-Boss Controller V3
  • Brew-Boss 4 Inch Digital Temperature Probe
  • Weldless Direct Contact Temperature Probe Kettle Mount
  • 20 Gallon Brew-Boss Kettle with Cover and Deluxe Accessory Port
  • Brew-Boss Exclusive 5500 Watt L6-30 Triclamp Stainlesss Steel Ripple Heating Element
  • 8 Foot L6-30 Extension Cord for Heater Element
  • Stainless Steel Mesh COFI Infusion Filter for 20 Gallon Brew-Boss Kettle
  • False Bottom for COFI Filter with Stainless Steel Center Infusion Tube
  • 24 Volt Brushless DC Brewery Grade Pump with Stainless Steel Pump Head
  • 90 Degree Barbed Elbow Threads Onto Center Infusion Tube
  • Stainless Steel Cam-Lock Fittings for All Hose Connections
  • Stainless Steel Flow Regulation Ball Valve (Gets Installed on Pump Discharge)
  • TriClamp Gaskets and Clamps
  • Stainless Steel Wing Nut Type Hose Clamps
  • 6' of Brewery Grade Silicone Tubing
  • Stainless Steel Lift Ring for COFI Filter
  • High Quality Teflon Pipe Thread Tape

Note: We no longer sell Android Tablets with our systems. You will need an Android Tablet to run the Brew-Boss app on. We recommend a 10.1" screen or larger. The app is not designed for phones. If you don't have an Android tablet, we recommend this one from Amazon or an Amazon Fire tablet. The controller provides it's own WiFi network that the tablet connects wirelessly to or you can connect to the controller through your home network in client mode. Therefore, there is no need for wifi in your home if you do not have it.

The controller is supplied with 15 foot long 10 gauge cable for powering the unit with 240 Volts AC. The 240VAC power cable is supplied with a molded L6-30P twist lock plug. It is highly recommended that you install a Ground Fault Interrupter (GFI) type breaker on the circuit(s) you will be plugging the Brew-Boss into or use our inline GFI unit. If you need a plug other than the L6-30P provided, you may simply cut the supplied plug off and connect a plug that matches your outlet.

The controller requires a 220-240 Volt circuit of at least 30 Amps with a GFI breaker (or our inline GFI) installed to operate. The controller has a single 240 Volt L6-30R twist lock output plug that connects to a Brew-Boss Heater using the supplied L6-30 extension cord. A digital temperature probe is included with this controller. The controller is shipped with a L6-30R twist lock receptacle for a heater that mates to the Brew-Boss integrated elements. If you have a different heater, you can simply cut the end of the heater cable off and wire to your heater.

5500 Watt Heater

The Brew-Boss Heaters are all stainless steel and designed especially for brewing.

They clean very easily and look brand new after each brew session.


The kettles are complete and are supplied with TIG welded ferrules for the heater(s) and pump/output ports. They also include the Weldless Direct Contact Temperature Probe Mount. The Kettles also include electrically etched volume markings on the inside of the kettle.

Brew-Boss kettle with volume marking on the inside (20 Gallon Shown)

Each kettle is also equipped with a side recirculation Deluxe Accessory Port near the top of the kettle. This port has a Cam-Lock quick connect installed on both the inside and outside of the kettle to allow connection of the recirculation system hardware. The Swirl-Boss whirlpool device attaches to this port as well. Of course, the kettle includes a cover/lid as well.

Brew-Boss Deluxe Accessory Port

The 20 gallon kettle will do 5 or 10 gallon batches and also 15 gallon batches if needed using the Hybrid method.

COFI Mash Hardware
(COFI, our patent pending mashing technology that can increase efficiency)
Mashing is the brewer's term for the hot water steeping process which hydrates the barley, activates the malt enzymes, and converts the grain starches into fermentable sugars. The Brew-Boss system performs efficient mashing by continuously recirculating the wort during mashing through the grain bed, improving the efficiency over traditional Brew-In-A-Bag type systems. Recirculating the wort through the mash also creates a clearer wort, as the grain acts as a filter media as well.

Includes COFI Mash Infusion Filter

This mash option uses a Patent Pending stainless steel mesh basket (COFI Filter) to contain the grains. This mesh basket is also equipped with a cover that prevents grains from exiting the basket over the top edge during mashing. This allows higher flow rates during mashing which can provide more efficient conversion. Recirculated wort is delivered to the grains via a special center infusion tube that maximizes coverage of all grains inside the filter, creating a very steady temperature profile within the grain bed without the need for stirring. The COFI filter also includes a Patent Pending false bottom within the filter that allows the grains to be squeezed when they are removed like a reverse French Press. This assures maximum extraction of sugars trapped within the grains. This eliminates the need for a sparge.

COFI Filter Attached to Accessory Port

Included Options

In addition to the above items, this system includes the following options:

Pick-Up Tube- This durable Tri-Clamp pickup tube is constructed of beautiful polished 304 stainless steel. It attaches directly to the Tri-Clamp ferrule on the Brew-Boss kettle using a Tri-Clamp gasket and Tri-Clamp Clamp (gasket and clamp included). It allows you to drain nearly all of the wort out of your kettle without tipping the kettle and disrupting the trub on the bottom. Mount this between your kettle and valve or between your kettle and pump. Includes pick-up tube with 1.5" Tri-Clamp ferrules.

Swirl-Boss -
This is a nifty whirlpool device that mounts directly to the accessory port on the kettle and allows you to whirlpool your wort before transferring to your fermenter. Special reduced price when ordered with a Brew-Boss system.

Trivet Set - These Three (3) silicone trivets are great for placing your Brew-Boss kettle on to prevent heat transfer to your table or bench. The protect the surface and keep the kettle from accidentally being slid around, so they add safety as well. We sell these for less than our local Walmart does, so if you need them, add them to the system order.

Other Available Options (additional cost)

In addition to the above options which are required for a complete system, we offer some options that allow you to enhance your Brew-Boss system.

In-Line GFI -
This is a portable In-Line GFI unit with L6-30 plugs already on it. This is handy if you do not have room in your home panel to add a GFI circuit breaker. it simply plugs into a L6-30 receptacle and the Brew-Boss controller plugs into it.

Hops-Boss -
This is our patent pending automated hops feeder offered at a special reduced price if ordered with a system. Automatically adds your hops at the proper time.

Condenser-Boss Steam Condenser - If you brew indoors, you definitely want to consider adding this item to your order. This device simply connects to the accessory port on the kettle and to your cold water supply (tap water) and converts most of the steam generated during the boiling step into water. It allows you to brew inside without creating clouds in your home! It also reduces the amount of electricity required to maintain a boil, so it save energy and $$ as well.

90 Degree Pump Mounting Kit - This kit option includes a 90 degree elbow and an additional gasket and clamp to allow you to rotate the pump 90 degrees as shown in the main image for this item (the image with the system sitting on the brew stand). If you don't like the pump sticking straight out then order this add-on kit.

Accu-Fill Autometed kettle Filler - This device attaches to the accessory port on the kettle and to your water supply. It automatically dispenses the proper amount of water into your kettle before brewing. it can be controlled by the Android App and included in your brew steps or used manually in stand-alone mode. This device is great for Brew-on-Premise operators, production breweries, or those that want cool automation!

Chiller - We have found this to be the best chiller on the market. The copper in Plastic design never plugs and provides very high cooling efficiency from your cold tap water. Much better design than flat plate chillers that are prone to plugging up and impossible to clean and much more efficient than immersion chillers.

Fast Ferment Fermenter -
This is quite possibly the greatest fermenter ever designed. We use these exclusively in our Brew-On-Premise operation and they are awesome. They eliminate the need for a primary to secondary transfer (potential oxygen contact and contamination) and your retired yeast sediment never touches the beer you drink. They also make harvesting yeast for re-use a dream. Once you use a FastFerment you'll never wonder how you every got buy with carboys or buckets.

Hoist - This is a really nice double line rope hoist that makes removing your grain bag, grain basket, or COFI filter very easy. It is auto locking so you don't have to tie it off or have someone else hold it. You'll need something to lift your grains out if you have a 15 or 20 gallon system. This hoist is the best we've found.plugs into it.

Please note that because of the configuration and options available, systems are built to order and take 1-2 weeks to ship based on order backlog.

Warning - Shock Hazard!

This is an all electric system. It eliminates the many dangers associated with gas fired systems, but working with electricity can be dangerous. You can be seriously injured or worse die by electricity. This system requires that you provide a 240VAC 30 AMP circuit and the appropriate power plug for 240VAC systems and dual 15 AMP 120VAC circuits for 120VAC systems. The use of ground fault interrupter(s) (GFI) is highly recommended. If you are not comfortable or not knowledgeable with electrical wiring please have a certified electrician wire your system.

By ordering this product, you accept all liabilities for any and all damages that may occur by your usage of this equipment. Further you agree to install all equipment in accordance with your local codes and regulations as required. We will require that you sign liability release prior to shipping you hardware.

Hops-Boss Hops Filter/Spider 16" Long Cleaning Brush for Heater Elements
Price: $30.00
Price: $5.00
Hops-Boss Hops Filter/Spider 16" Long Cleaning Brush for Heater Elements