Home > Complete Brewing Systems >

Preconfigured V3 Deluxe 10 Gallon 120 Volt Brew-Boss Electric Brewery System
Preconfigured V3 Deluxe 10 Gallon 120 Volt Brew-Boss Electric Brewery System


Price: $1,569.00

Availability:: Usually Ships in 3 to 5 Business Days
Product Code: BB-10BIAB-V3

Pump Mount 90 Degrees:

Condenser-Boss Steam Condenser*:


Trivet Set*:



Preconfigured All-Grain Brew-Boss 10 Gallon 120 Volt Brew-In-A-Bag Electric Brewing System

This item is for our 10 gallon 120 volt Brew-In-A-Bag (BIAB) System that is configured with the most popular options at a discounted package price. This system is perfect for apartment dwellers and brewers that want a portable system that they can bring to friends homes, etc. It does not require 240 volt power so it can be plugged into any standard 120 volt outlet that is serviced by a 20 amp breaker.

The system utilizes a mesh bag to hold the brewing malts and grains during mashing. The grain bag sits on top of a false bottom that allows wort to be recirculated from the bottom of the kettle to the top of the grains during mashing using the supplied brewery pump. After mashing, the bag is removed and the rest of the brewing process occurs in the same kettle.

Note that because this system operates on 120 volts, brewing times are greater than with our 240 volt systems, but the 2250 watt element is more than capable of holding a rolling boil. This system is designed to brew 3-5 gallon net batches of beer.

It includes the following items:

  • 120/240 Volt Brew-Boss V3 Controller
  • 120 Volt L6-30 Plug Adapter (allows 240 volt controller to operate at 120 volts)
  • Brew-Boss 4 Inch Digital Temperature Probe
  • Weldless Direct Contact Temperature Probe Kettle Mount
  • 10 Gallon Brew-Boss Kettle with Cover and Deluxe Accessory Port and three Triclamp Ferrules
  • Triclamp clamp, cover, and gasket for spare Triclamp port.
  • Brew-Boss Exclusive 120 volt 2250 Watt L6-30 Triclamp Stainlesss Steel Ripple Heating Element
  • 8 Foot L6-30 Extension Cord for Heater Element
  • Stainless Steel False Bottom (supports grain bag and protects heater element)
  • Accessory Port mounted sparge hose. Lies on top of grain bag during mashing.
  • 24 Volt Brushless DC Brewery Grade Pump with Stainless Steel Pump Head
  • Stainless Steel Cam-Lock Fittings for All Hose Connections
  • Stainless Steel Flow Regulation Ball Valve (Gets Installed on Pump Discharge)
  • TriClamp Gaskets and Clamps
  • Stainless Steel Wing Nut Type Hose Clamps
  • 6' of Brewery Grade Silicone Tubing
  • High Quality Teflon Pipe Thread Tape
You will need an Android Tablet to run the Brew-Boss app on. We recommend a 10.1" screen or larger. The app is not designed for phones. If you don't have an Android tablet, we recommend this one from Amazon or an Amazon Fire tablet.

The controller is supplied with 15 foot long 10 gauge cable for powering the unit. The power cable is supplied with a molded L6-30P twist lock plug and a special adapter cable to allow the controller to operate on 120 volts. It is highly recommended that you install a 20 amp Ground Fault Interrupter (GFI) type breaker on the circuit(s) you will be plugging the Brew-Boss into.

The controller has a single L6-30R twist lock heater output receptacle that connects to a Brew-Boss Heater using the supplied L6-30 extension cord. A digital temperature probe is included with this controller. The controller is shipped with a L6-30R twist lock receptacle for a heater that mates to the Brew-Boss integrated elements.

2250 Watt Heater

The Brew-Boss Heaters are all stainless steel and designed especially for brewing. They clean very easily and look brand new after each brew session.


Brew-Boss kettles are complete and are supplied with TIG welded ferrules for the heater(s) and pump/output ports. They also include the Weldless Direct Contact Temperature Probe Mount.

Each kettle is also equipped with a side recirculation Deluxe Accessory Port near the top of the kettle. This port has a Cam-Lock quick connect installed on both the inside and outside of the kettle to allow connection of the recirculation system hardware. The optional Swirl-Boss whirlpool device attaches to this port as well. Of course, the kettle includes a cover/lid as well.

Brew-Boss Deluxe Accessory Port

The 10 gallon kettle will do 3-5 gallon net batches. (Boil volume up to 6 gallons).

BIAB Mash Hardware
This system uses the Brew-In-A-Bag mashing system. Mashing is the brewer's term for the hot water steeping process which hydrates the barley, activates the malt enzymes, and converts the grain starches into fermentable sugars. The Brew-Boss system performs efficient mashing by continuously recirculating the wort during mashing through the grain bed, improving the efficiency over traditional Brew-In-A-Bag type systems. Recirculating the wort through the mash also creates a clearer wort, as the grain acts as a filter media as well.

Mesh Grain Bag Installed on kettle.

Includes False Bottom that Supports the Grain Bag and protects the heater element.

Available Options (additional cost)

We offer some options that allow you to enhance your Brew-Boss system.

Pick-Up Tube- This durable Tri-Clamp pickup tube is constructed of beautiful polished 304 stainless steel. It attaches directly to the Tri-Clamp ferrule on the Brew-Boss kettle using a Tri-Clamp gasket and Tri-Clamp Clamp (gasket and clamp included). It allows you to drain nearly all of the wort out of your kettle without tipping the kettle and disrupting the trub on the bottom. Mount this between your kettle and valve or between your kettle and pump. Includes pick-up tube with 1.5" Tri-Clamp ferrules.

Swirl-Boss -
This is a nifty whirlpool device that mounts directly to the accessory port on the kettle and allows you to whirlpool your wort before transferring to your fermenter. Special reduced price when ordered with a Brew-Boss system.

Trivet Set - These Three (3) silicone trivets are great for placing your Brew-Boss kettle on to prevent heat transfer to your table or bench. The protect the surface and keep the kettle from accidentally being slid around, so they add safety as well. We sell these for less than our local Walmart does, so if you need them, add them to the system order.

Condenser-Boss Steam Condenser - If you brew indoors, you definitely want to consider adding this item to your order. This device simply connects to the accessory port on the kettle and to your cold water supply (tap water) and converts most of the steam generated during the boiling step into water. It allows you to brew inside without creating clouds in your home! It also reduces the amount of electricity required to maintain a boil, so it save energy and $$ as well.

90 Degree Pump Mounting Kit - This kit option includes a 90 degree elbow and an additional gasket and clamp to allow you to rotate the pump 90 degrees as shown in the main image for this item (the image with the system sitting on the brew stand). If you don't like the pump sticking straight out then order this add-on kit.

Fast Ferment Fermenter -
This is quite possibly the greatest fermenter ever designed. We use these exclusively in our Brew-On-Premise operation and they are awesome. They eliminate the need for a primary to secondary transfer (potential oxygen contact and contamination) and your retired yeast sediment never touches the beer you drink. They also make harvesting yeast for re-use a dream. Once you use a FastFerment you'll never wonder how you every got buy with carboys or buckets.

Warning - Shock Hazard!

This is an all electric system. It eliminates the many dangers associated with gas fired systems, but working with electricity can be dangerous. You can be seriously injured or worse die by electricity. This system requires that you provide a 120VAC 20 AMP circuit and the appropriate power plug. The use of ground fault interrupter(s) (GFI) is highly recommended. If you are not comfortable or not knowledgeable with electrical wiring please have a certified electrician wire your system.

By ordering this product, you accept all liabilities for any and all damages that may occur by your usage of this equipment. Further you agree to install all equipment in accordance with your local codes and regulations as required. We will require that you sign liability release prior to shipping you hardware.

Hops-Boss Hops Filter/Spider 16" Long Cleaning Brush for Heater Elements
Price: $30.00
Price: $5.00
Hops-Boss Hops Filter/Spider 16" Long Cleaning Brush for Heater Elements