Home > Brewing Equipment and Accessories > Automatic Kettle Fillers >

Accu-Fill Pro Automated kettle Filler for V2+ Brew-Boss Controllers
Accu-Fill Pro Automated kettle Filler for V2+ Brew-Boss Controllers

Price: $139.00

Availability:: Usually Ships in 3 to 5 Business Days

Accu-Fill Stand-Alone Option:
Please add the Stand-Alone option to this order so that I can use this w/o a Brew-Boss Controller [Add $29.00]


Accu-Fill Pro Automated Kettle Filler for Brew-Boss Controllers V2 or Greater

Accu-Fill Pro is an an automated kettle filler designed to plug directly into the Brew-Boss controller (V2+). If you want to use this device without a Brew-Boss controller, see the stand-alone option description below.

Never again hear the sound of an overfilled kettle splashing water all over your floor because you forgot to check your kettle while it was filling!

The device is powered by the Brew-Boss controller (or optional power pack) and can be controlled automatically as well. Simply attach the unit to the inside of your Brew-Boss kettle's accessory port and attach a water supply to the outside accessory port connection.

  • Key Features:
    • Plugs Directly into Brew-Boss Brew Controller (V2 or greater required)
    • Fills Kettles Automatically to within 0.1 gallon
    • Attaches directly to Accessory Port on Brew-Boss Kettles
    • Allows automated filling control via step file on Brew-Boss app
    • Fill Volume can be manually set directly on the unit using a single function button (0.1 gallon resolution)
    • Factory Calibrated but can be re-calibrated by user
    • 1/2" High Flow Hose Barb Discharge allows 1/2" ID Brewery Tubing discharge tube to be easily installed if desired (not included)
    • Includes power/data cable for connection to V2 or greater Brew-Boss controllers
    • Female Garden Hose Input and mini valve allow use of standard garden hose for water supply (Optional)
    • Components rated for water up to 80 Degrees C
    • Includes electronic float switch that prevents kettle overfilling
Please note that automated operation via step file with Brew-Boss app requires controller firmware V2.07 or greater. Contact Brew-Boss for information on updating your firmware.

If you don't have a Brew-Boss controller, please order with the stand-alone connection option.
This stand-alone option version is a stand-alone version that can be used by any brewer even if you don't have a Brew-Boss brew controller. This device simply attaches to your garden hose and plugs into a standard wall outlet. The stand-alone option includes a wall power supply and a power adapter that emulates the Brew-Boss controller output. The power adapter below is included only with the stand-alone option! Make certain to check the stand-alone option check box if you want that option.

Accu-Fill Pro Operation