Complete Brew in a Basket (BIAB) 240 Volt Electric Brewery System with 10, 15, or 20 Gallon KettleThis is a complete system that is pre-configured with all the components you need for a complete electric brewery. It includes a 240 volt Brew-Boss controller, 10, 15, or 20 gallon Brew-Boss kettle, 5500 Watt Brew-Boss heater assembly, BIAB (Brew in a Basket) Mash system with stainless steel mesh basket, plastic body pump, all recirculation hoses and stainless steel barbed fittings, and a temperature probe.
The 10 gallon kettle will accommodate batches up to 5 gallons.
The 15 gallon kettle will accommodate batches up to 10 gallons (5 gallon max for high gravity beers > 1.060 OG)
The 20 gallon kettle will accommodate batches up to 15 gallons (10 gallon max for high gravity beers > 1.060 OG)
This controller requires a 240 Volt 20 Amp circuit with a GFI breaker installed to operate. It also requires a separate 120 Volt GFI outlet for the pump for the USA version. The controller has a single 240 Volt output plug that connects to a Brew-Boss Heater assembly as well as a single 120 Volt output plug for a 120 volt pump. A digital temperature probe is included with this controller.
The 240 Volt Brew-Boss controller is supplied with 15 foot long 10 gauge cables for powering the unit with
240 Volts AC. The 240VAC power cable is supplied with an L6-30P twist
lock plug. It is highly recommended that you install a Ground Fault
Interrupter (GFI) type breaker on the circuits you will be plugging the
Brew-Boss into. If you need a plug other than the L6-30P provided, you
may simply cut the supplied plug off and connect a plug that matches
controller requires a 240 Volt 30 Amp circuit with a GFI breaker
installed to operate. It also requires a separate 120 Volt GFI outlet
for the pump for the USA version. The controller has a single 240 Volt
output plug that connects to a Brew-Boss Heater assembly as well as a
single 120 Volt output plug for a 120 volt pump. A digital temperature
probe is included with this controller. The controller is shipped with a
L6-30R twist lock receptacle for a heater that mates to the Brew-Boss
Note: We no longer sell Android Tablets with our systems. You will need an Android Tablet to run the Brew-Boss app on. We recommend a 10.1" screen or larger, but it will run on tablets with screen sizes 7" or larger. The app is not designed for phones and will not run on phones. If you don't have an Android tablet, we recommend this one from Amazon or an Amazon Fire tablet.
Tip: You can click on the "Update Price" button to see your total cost as you add items.
The Brew-Boss Heaters are all stainless steel and designed especially for brewing. They include a triclamp flange and a molded L6-30P plug right on them. The Brew-Boss controller includes a mating L6-30R receptacle molded onto the cord.
They clean very easily and look brand new after each brew session.
The kettles are complete and are supplied with TIG welded ferrules for the heater(s) and valve ports. They also include the Weldless Direct Contact Temperature Probe Mount, as well as a stainless steel drain valve.
Each kettle is also equipped with an Accessory Port near the top of the kettle. This port has a Cam-Lock quick connect installed on the inside and a barbed nipple on the outside of the kettle to allow connection of the recirculation system hardware. Of course, the kettle includes a cover/lid as well.
Brew-Boss Accessory Port
This systems uses the BIAB (brew in a basket) mash method.
The BIAB Mash Option includes all the hoses, pump, fittings, and components for using the system with the traditional Brew-In-A-Bag (BIAB) method.
It includes the following components:
- Stainless Steel Mesh Basket with Support legs to Clear the Heating Element (holds about 13lbs of grain)
- Copper Sparge/Sprayer Arm Connects to Recirculation Port
- 120 volt Plastic Body Chugger Recirculation Pump
10 Gallon Kettle with BIAB Mesh Basket
The Recirculation System Hardware includes all the plumbing from the kettle valve to the pump and from the pump to the recirculation port on the kettle.
It includes the following components:
- Stainless Steel Barbed Fittings for All Hose Connections
- 6' of Brewery Grade Silicone Tubing
- Stainless Steel Flow Regulation Valve for Pump Exit
- Stainless Steel Wing Nut Type Hose Clamps for Hoses on High Pressure Side of Pump
Please note that because of the configuration and options available, systems are built to order and take 1-2 weeks to ship based on order backlog.
Warning - Shock Hazard!
is an all electric system. It eliminates the many dangers associated
with gas fired systems, but working with electricity can be dangerous.
You can be seriously injured or worse die by electricity. This system
requires that you provide a 240VAC 30 AMP circuit and the appropriate
power plug for 240VAC systems and dual 15 AMP 120VAC circuits for 120VAC
systems. The use of ground fault interrupter(s) (GFI) is highly
recommended. If you are not comfortable or not knowledgeable with
electrical wiring please have a certified electrician wire your system.
By ordering this product, you accept all liabilities for any and all
damages that may occur by your usage of this equipment. Further you
agree to install all equipment in accordance with your local codes and
regulations as required. We will require that you sign liability release
prior to shipping you hardware.