Do it Yourself Brew-Boss "Brain" Kit
For the Do-It-Yourselfer, purchase
the "Brains" of the Brew-Boss controller. Add it to your existing
electric brewery panel or start from scratch. A cost effective way to
enjoy the benefits of the Brew-Boss system.
This kit includes the following:
Arduino type board preloaded with the Brew-Boss firmware
- Option of a 10" Android Tablet
Brew-Boss Control Shield with:
wi-fi interface module
Outputs for heater element and pump to be connected to your solid state relays
Temperature probe port
Digital temperature probe
12 Digit LCD screen and cable
Brew-Boss Panel Overlay for LCD
9VDC Power Supply
To use this kit you will need to supply your own wiring, solid state
relays, water-tight cable glands, master power switch, and the control enclosure of your choosing. The black and red wires on the controller
are for the heater and the green and black wires are for the pump.
Both must be connected to solid state relays appropriately sized for
the heater and pump wattage you will be controlling. An appropriate
heat sink should be used as well.
We are offering this kit for those that already have created or want
to create their own electric brewery control panels. No assistance will
be provided by us in the design or implementation of the Brew-Boss
controls other that support of the controller itself. Those purchasing
this option should be familiar with high voltage wiring and control
Warning - Shock Hazard!
is an all electric system. It eliminates the many dangers associated
with gas fired systems, but working with electricity is dangerous. You
can be seriously injured or worse die by electricity. This system
requires that you provide a 240VAC 30 AMP circuit and the appropriate
power plug. A ground fault interrupter is highly recommended. If you
are not comfortable or not knowledgeable with electrical wiring please
have a certified electrician wire your system.
*** By ordering this product, you accept all liabilities for any
and all damages that may occur by your usage of this equipment. Further
you agree to install all equipment in accordance with your local codes
and regulations as required.